n Introduction
PD-SD master-slave driver series is designed to drive constant current LED products with innovational primary-secondary driver configuration, the digital power line communication is patented. The SD slave driver has individual addressable, the PD-CB master series is controlled via Casambi lighting control system and PD-ML master series is controlled by meshlink remote. This master-slave dimmable driver could be full-time constant dimming, non-flicker.
n Wiring Diagram
| Slave PLC LED Driver |
| Model | SD60 /-G | SD20 /-S |
| Function | 60W slave LED driver | 20W slave LED driver |
| Electrical Specification |
| Working Voltage | DC 48V |
| Efficiency | >93% @ full load |
| Output Voltage | DC 0-48V |
| Output Current | Constant current 0-1500mA | Constant current 0-700mA |
| Rated Output Power | 60 Watts | 20 Watts |
| Master-Slave Communication | Rayrun patent power line communication (PLC) protocol |
| Protection | Overload / over heat / output short circuit |
| Dimming mode | Full time non-flicker constant current |
| Output Setting | Current adjustable via DIP switch | Fixed |
| Slave Address Setting | Group 1-4 via DIP switch | N/A |
| Waterproof | N/A | IP63 / IP68(-S Version) |
| Working Temperature | -30~70℃ |
| Functions |
| Operation Mode | Work with PD series driver, drive LED fixture |
| Group Feature | Available on -G version | N/A |
| Power & LED Connector |
| Power Connector | Wago804 standard push connector | Lead wire |
| LED Connector | Wago804 standard push connector | Lead wire |
| Dimension & Weight |
| Dimension | 134x39x24mm | 87x21x8.5mm |
| Net Weight | 64g | 23 grams |
