n Introduction
N20 tunable white LED controller is designed to drive constant voltage LED products with common anode connection in voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup white tunable LED brightness and color temperature on the remote controller, the main unit is powered by DC power supply and receives remote controller commands to drive LED fixtures.


n Features

n Wiring Diagram

Nano RF Wireless Tunable White LED controller |
Model | N20 | N20-S |
Electrical Specification |
Working Voltage | DC 5-24V |
Rated Output Current | 2x5A | 2x8A |
Remote Control | RF wireless remote controller |
Remote Control Frequency | 433.92MHz |
Remote Control Battery | CR2032 3V cell battery |
Remote Transmit Power | <10dBm |
Remote Distance | >15 meters in open area |
Remote Controller Matching Mode | Each unit can be matched to 5 remote controllers / remote controller can be matched to any receiver |
PWM Output Grade | 4000 Levels |
PWM Frequency | 1KHz |
Protection Function | Wrong wiring / Overload / Short circuit / Overheat |
Working Temperature | -30~60℃ |
IP Grade | IP-40 |
Components & PCB | SMD parts / 4-layer FR-4 pcb |
Functions |
Brightness Level | 11 Levels |
Color Temperature Level | 7 Levels |
Brightness Shortcut | 3 Levels |
Color Temperature Shortcut | 3 Levels |
Gentle Fading | Yes |
Power Off Memory | Yes |
Power & LED Connector |
Power Connector | Slot screw terminal, max 17AWG each slot, two positive and two negative in parallel. |
LED Connector | Slot screw terminal, max 17AWG each slot |
Dimension & Weight |
Dimension | Main unit: 87x24x15mm, Remote: 86.5x36x7.5mm |
Net Weight | 38g | 38g |