n Introduction
TM Meshlink series LED controller is designed to drive constant voltage LED products in voltage range of DC6V-24V. It works with the Meshlink remote controller or wall panel. The Meshlink wireless protocol is based on Bluetooth mesh technology, multiple controllers can be synchronized and the wireless connection is much more reliable than traditional RF technology. User can turn on/off, set dynamic modes, set group working or adjust LED brightness conveniently via the remote controller or wall switch and touch panel.
n Features
n Wiring Diagram
| TM series MeshLink CV LED controller |
| Model | TM10 | TM20 | TM30 |
| Function | Single Color
CV controller | CCT
CV controller | RGB
CV controller |
| Electrical Specification |
| Working Voltage | DC 6-24V |
| Rated Output Current | 1x6A | 2x4A | 3x3A |
| Wireless Connection | Bluetooth Low Energy mesh protocol |
| RF Band | 2.4GHz ISM band |
| Wireless Transmit Power | <7dBm |
| Wireless Distance | >15 meters at open area |
| PWM output grade | 4000 levels |
| PWM Frequency | 1KHz |
| Protection Function | Wrong wiring / Overload / Short circuit / Overheat |
| Working Temperature | -30~60℃ |
| Functions |
| Brightness Control | 0-100%, with gamma correction |
| Dynamic Mode | Yes | N/A | Yes |
| Group Funtion | Yes, supported by remote controller |
| Synchronization between Controllers | Yes |
| OTA Update Service | Yes |
| Smooth Fading | Yes |
| Power off memory | Yes |
| Power & LED Connector |
| Power Connector | 20 AWG lead wire / DC connector |
| LED Connector | 20AWG lead wire |
| Dimension & Weight |
| Dimension | 50x15x7mm |
| Net Weight | 12g ± 2g |
