n Introduction
NT20 LED controller is designed to drive constant voltage CCT LED products in the voltage range of DC6-24V. It can be controlled by smartphone with the Tuya app via wi-fi connection or by the stand-alone RF remote controller. Users can set up LED brightness, color temperature with the rich function on smartphone Tuya app or the easy operation remote controller.
n Features
n Wiring Diagram
NT series Tuya+Remote CV LED controller |
Model | NT12 | NT20 | NT30 | NT40 | NT50 |
Model Suffix | W: Tuya Wifi; Z: Tuya Zigbee; B: Tuya Bluetooth |
Function | Single Color CV controller with RF remote controller | CCT CV controller with RF remote controller | RGB CV controller with RF remote controller | RGBW CV controller with RF remote controller | RGB+CCT CV controller with RF remote controller |
Electrical Specification |
Working Voltage | DC 12-24V |
Rated Output Current | 10A | 2x5A | 3x4A | 4x3A | 5x2.5A |
Smartphone Connection | Tuya Wifi, Tuya Zigbee or Tuya Bluetooth |
Remote controller connection | 433MHz RF |
RF remote transmit power | <7dBm |
RF remtoe control distance | >10 meters at open area |
PWM output grade | 4000 levels |
PWM Frequency | 1KHz |
Protection Function | Wrong wiring / Overload / Short circuit / Overheat |
Working Temperature | -20~55℃ |
Functions |
RF remote control | Yes, with optional magnet wall holder |
Dynamic Mode | Yes | Yes | N/A | Yes |
Gradient Speed | Adjustable on app |
Power on Status | Adjustable on app |
Power & LED Connector |
Power Connector | Slot screw block terminal, max 12AWG cable |
LED Connector | Slot screw terminal, max 17AWG each slot (max 12AWG for NT12) |
Dimension & Weight |
Dimension | Main unit: 87x24x15mm, Remote: 86.5x36x7.5mm(122x35x9mm for NT12) |
Net Weight | 38g (exclude magnet remote holder) |